Water is important. There are many important things about it, but one of the most important is that water should sometimes go to certain places and not go to other places. You want your plumbing and waterproofing to work, and work well. But sometimes pipes and bathtubs leak and allow water and other liquids to go where they shouldn’t. In such cases, it can mean a hefty bill for any damage caused by leaks that aren’t fixed quickly.
In some cases, such as on a boat, a leak may be dangerous to your life. In other cases, such as that of a poor window caulking job, it’s more of a persistent annoyance and discomfort to you and others. You and your loved ones will feel chilly or moist air seeping into your home through cracks in the windows, or cool air-conditioned air seeping out. Heating (or cooling) costs will go up – unless you take the initiative and do something about it by using some sort of sealer, even if only as a temporary fix, to improve the situation. Flex Seal reviews have consistently described the products as excellent for these kinds of jobs – quickly fixing cracks, leaks, and other things where you don’t want water and moisture getting in or out.
There are several different products in the Flex Seal “family.” The main three are Flex Seal Liquid, Flex Seal Tape, and Flex Seal Brite Spray. All three work on the same principle – they create a waterproof rubber layer that water can’t get through. But each is different and deserves a more detailed look.
Flex Seal Spray
The Flex Seal Spray is perhaps the most well-known of the Flex Seal products. It’s probably the easiest to use – just point and spray – and can be used to cover large areas quickly and with little effort once you get the hang of it. Getting the hang of it is simple – the trick is to practice beforehand and follow the instructions. Clean the surface you’re going to spray onto thoroughly – remove dirt, grease, and anything else that could come off later and take the applied rubber with it. Try to ensure that the surface is dry, too – you can spray Flex Seal onto moist surfaces, but it’ll be less effective, take more to stick, and longer to dry.
You should spray from 8 to 12 inches away for best results – any closer and you might make the layer of rubber thicker than it needs to be, which would also mean that it takes longer to dry, and any further away might result in the opposite – not enough coverage. The secret to getting a proper waterproof layer of rubber that lasts is applying several even coats of the spray. Each layer should be allowed to dry for 24 to 48 hours, so it’s also a question of patience – but patience in the case of waterproofing pays off more than haste.
People have fixed things as diverse as motorcycle handles (that would have cost $300 if done professionally), birdbaths, and condensate pumps with the Flex Seal Spray. It’s a great product to have on hand for unexpected situations at home, so if you want to be prepared to tackle leaks and other waterproofing challenges, and save yourself the high costs of calling in professionals, grab yourself a can or two today – it’s great value for the money! But the Flex Seal Spray, being a spray, can’t handle all the situations where you might need a rubber sealant. It’s hard to apply it effectively to stop up bigger cracks – if you can stick a large kitchen knife into it, you’ll probably need something more heavy duty…
Flex Seal Liquid
That’s where Flex Seal Liquid comes in. Instead of being applied as a spray, Flex Seal Liquid is applied as a thick, viscous rubber “paint.” It’s better suited for covering large surfaces, such as roofs, since it can be applied with a roller. It’s also better-suited to tackling larger cracks that the Flex Seal spray can’t quite manage. Similarly to the spray, the applied product takes a few hours to dry to the touch and between 24 to 48 hours to cure completely. It’s highly recommended to apply another coat only after 24 hours have passed. You can and should be creative with Flex Seal Liquid.
For example, if something has a big hole that you want to close and waterproof, but you don’t know how, combining Flex Seal with paper – yes, paper – can do the trick. Simply apply a layer of the Flex Seal liquid around the hole. Stick a piece of paper larger than the hole, but which fits within the area covered by the Flex Seal liquid. Let the first layer dry, and apply the next coat over both the piece of paper and the first coat of Flex Seal. You’ll find that it’s waterproof! This kind of creative combination can be used in all sorts of situations where a gap is too large to fill with Flex Seal liquid or spray alone – such as windows that have been broken, but which are only missing a relatively small piece of glass. Flex Seal Liquid can be used to do a quick repair without having to change the whole window immediately.
And both Flex Seal Spray and Liquid can be painted over once dry, allowing you to make your quick fix blend into the surrounding color and be less obvious. Go ahead and order Flex Seal Liquid for your home – it’s an indispensable and versatile tool, a can of which will go a long way.
Flex Seal Tape
Finally, there’s Flex Seal Tape. Composed of the same waterproof material as the Flex Seal Spray and Liquid, it’s perhaps the best suited of the three to emergency situations. Let’s say your pool got cut open by something sharp. Water is pouring out. What do you do? Neither the Flex Seal Spray nor the Liquid is going to be much use in this situation – they take hours to dry and set, but you need it fixed within a few minutes. That’s no problem for Flex Tape – simply cut it, peel off the backing, which reveals the adhesive, and stick the tape where you need it – you can even stick it on underwater, which helps if you want your pool to still look visually attractive after this quick fix. The tape’s adhesive sets quickly and is industrial-strength, meaning it won’t let go without a fight.
Of course, all of these products have their own drawbacks. As just noted, the spray and liquid are not instant sealers – they take several hours to dry and 24 to 48 hours to set completely. As with any rubber or silicone-based product, these Flex Seals and the Flex Tape won’t hold up to high temperatures – that means you shouldn’t try fixing a hole in your car’s engine with them. Anything over 200° F is bad, but it’s not a good idea to use it on anything that gets hot regularly – it will quickly degrade the rubber seal.
You should also keep in mind that rubber will not stick to highly plastic objects. Rubber won’t stick to rubber unless there is a silicone-based adhesive in the middle (as is the case with the Flex Tape.) These are physical characteristics that all similar products share with the Flex Seal products reviewed above, so similar products from other brands will have the same limits. All in all Flex Seal products are in the class of household tools and materials that will probably come in handy more than once during their lifespan, and they can make the difference between a quick DIY repair job and hundreds of dollars spent on calling out professionals. They’re great value for the money, and you can easily get Flex Seal products from Amazon or another online retailer.
They come highly recommended by thousands of people who have used them to deal with problems quickly and painlessly, so don’t become a victim of circumstance – prepare for the inescapable household mini-emergency and order a Flex Seal product now!